A slow drain is a warning. By the time it's a complete blockage, you're losing use of your kitchen, bathroom, or laundry room entirely. Masters Plumbing Service's drain techs in Millport, AL use hydro-jetting equipment rated to 4,000 PSI and CCTV pipeline cameras to locate, clear, and document the obstruction — not just temporarily push it further down the line.
📞 Call +1-855-718-1500 — Book Today
Every drain call we run in Millport, AL starts with identifying what type of blockage you're dealing with — because the method that clears a grease blockage efficiently is different from the one that handles root intrusion.
Our truck-mounted hydro-jetting units propel water at up to 4,000 PSI through a rotating nozzle that scours pipe walls clean — removing grease buildup, scale, and soft root intrusions in a single pass. Unlike augers, jetting leaves the pipe interior clean rather than just piercing a hole through the clog.
A camera inspection saves you money by showing us exactly what we're dealing with. It also protects you from paying to clear a blockage that's actually hiding a structural pipe failure that will recur immediately.
We clear kitchen drains, bathroom sink and shower drains, floor drains, laundry drains, and main sewer lines. Our equipment scales from a 1/2" kitchen drain line to a 6" commercial main — same certified technician, same professional-grade tools.
Our written service report notes the blockage type, location, method used, and any structural observations from the camera run. You walk away knowing the state of your drain system, not just that the water is flowing again.
From a slow bathroom sink to a full main-line stoppage affecting every fixture in the house, our drain techs in Millport, AL have the equipment and training to clear it.
Grease blockages in kitchen drain lines often occur 10–40 feet from the drain opening, past the p-trap, where the line cools and FOG solidifies. Our jetting equipment reaches and clears these deposits where a plunger or retail product cannot.
Hair and soap scum are the most common bathroom drain blockages. They bond to the pipe walls inside the p-trap and in the drain arm, forming a mat that progressively constricts flow. Our techs remove the drain cover, clear the p-trap obstruction with a hand snake or drum auger, and flush the line.
Root intrusion at pipe joints is the leading cause of main sewer blockages in homes over 20 years old. Our electric root cutter attachment on the sectional cable removes the root mass; we then scope again to confirm the line is clear before pulling equipment.
Floor drain traps can dry out and allow sewer gas into the structure if the drain isn't used regularly. We clear blockages, re-water the trap, and can install a trap primer if the drain is prone to drying in Millport's climate.
Restaurants, multi-family buildings, and homes with chronic grease or root problems benefit from scheduled hydro-jet maintenance on a 12–24 month cycle. We map the drain system, document baseline camera footage, jet the lines, and re-scope to confirm clean pipe walls. This approach prevents emergency backups rather than reacting to them.
Our inspection reports are accepted by real estate attorneys, home buyers, and insurers as documented evidence of drain system condition. If you're buying or selling a home in Millport, a pre-purchase drain scope is one of the best $300 you can spend.
Here's exactly how a Masters Plumbing Service drain call plays out in Millport, AL — from dispatch to documented clear.
Tell our dispatcher which fixtures are affected — one slow drain vs. multiple backed-up fixtures tells us whether we're likely dealing with a localized clog or a main line blockage. We schedule same-day when slots are available.
Before clearing anything, we run a CCTV camera into the line to see blockage type, location, and pipe condition. This prevents treating a structural pipe failure with a jetting pass that won't hold.
Based on the camera findings, we present you with a flat-rate quote and explain exactly which method we're using — electric auger, hydro-jet, root cutter — and why. No work begins until you approve.
If anything was found during the camera run that warrants monitoring or repair, it's noted in the written report so you have a record — useful for planning future maintenance or a repair conversation.

Called about a kitchen drain that three other plumbers had snaked without long-term success. Masters Plumbing Service ran a camera first and found grease buildup 28 feet in, past where any hand snake reaches. Hydro-jetted it, re-scoped to confirm clean, and the drain has run perfectly in the months since.
All three bathrooms drained slowly and the lowest floor toilet gurgled every time an upstairs fixture ran — classic main line partial blockage. Masters Plumbing Service's tech accessed the cleanout, ran the camera, and found root intrusion at a clay tile joint about 40 feet from the house. He cut the roots with the root cutter attachment and re-scoped to confirm clear flow. Also noted a joint offset at 68 feet that we'll need to line eventually — good to know before it becomes a full backup.
We own a rental property and schedule annual hydro-jet maintenance with Masters Plumbing Service. The jetting intervals have gotten the drain-related tenant calls down to nearly zero. The camera documentation each year also gives us a clear record of pipe condition over time.

Our drain technicians are based in and around Millport to keep drive times short and same-day slots realistic. We cover residential and commercial properties across Millport, AL.

Masters Plumbing Service's certified drain team is in Millport today. Call now to check same-day availability.
📞 Call +1-855-718-1500 Now